Pro-face AGP-3300 Series Instalační příručka stáhnout pdf (Strana 8)

8

Installations

1. Installation Requirements

• For easier maintenance, operation, and

improved ventilation, be sure to install the

GP at least 100 mm [3.94 in.] away from

adjacent structures and other equipment.

• Be sure that the surrounding air tem-

perature and the ambient humidity are

within their designated ranges. (Sur-

rounding air temperature: 0 to 50 °C,

Ambient humidity: 10 to 90 %RH, Wet

bulb temperature: 39 °C max.)

When installing the GP on the panel of

a cabinet or enclosure, “Surrounding

air temperature” indicates both the

panel face and cabinet or enclosure’s

internal temperature.

• Be sure that heat from surrounding equip-

ment does not cause the GP to exceed its

standard operating temperature.

2. GP Installation

(1) Create a Panel Cut and insert the GP

into the panel from the front.

(2) Confirm that the installation gasket is

attached to the GP unit and then place

the GP unit into the Panel from the front.

• It is strongly recommended that you use

the installation gasket, since it absorbs

vibration in addition to repelling water.

For the procedure for replacing the installa-

tion gasket, refer to “GP3000 Series Hard-

ware Manual”.

(3) The following figures show the four (4)

fastener insertion slot locations. Insert

each fastener’s hook into the slot and

tighten it with a screwdriver. Insert the

installation fasteners securely into the

insertion slot recess.

100

[3.94]

100

[3.94]

100

[3.94]

100

[3.94]

Unit:mm[in.]

100

[3.94]

100

[3.94]

100

[3.94]

Panel Face

Inside Cabinet

GP X Y

Panel

thickness

GP-3300

Series

156.0

[6.14 ]

123.5

[4.86 ]

1.6 [0.06]

to

5.0 [0.20]

GP-3400

Series

204.5

[8.05 ]

159.5

[6.28 ]

1.6 [0.06]

to

10.0 [0.39]

Unit: mm [in.]

X

r≤

3 [0.12]

Panel

thickness

GP

Y

+1

-0

+0.04

-0

+1

-0

+0.04

-0

+1

-0

+0.04

-0

+1

-0

+0.04

-0

TOP

Insertion Slots

(The figure shows the GP-3300 series.)

Bottom

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Komentáře k této Příručce

Žádné komentáře